Long-Term Ammunition Storage

0
710

If you are anything like I was about a decade back, all you needed to know about ammunition storage was ammo could survive the trip from your shopping cart to the checkout, and from the checkout to the range.

Ammunition had a short life as far as I was concerned, destined to be bought and promptly consumed in the chamber of a gun. I lived in Florida at the time, a very gun friendly state, and with ranges and gun shops on every corner, ammo practically grew on trees. Yep, planted right next to the oranges. You don’t need to stash what you can never run out of. After all, you can just buy more.

The Great Ammunition Famine

Those days of plentiful supply came to an abrupt halt around 2007. As is customary, political posturing on the topic of gun and ammo regulation leading up to the presidential election led to rushes on purchasing, and rushes led to panicked hoarding.

The subsequent election of the 44th President of the United States applied further pressure to already straining industries, and all throughout the next 8 years in America there were terrible scarcities of guns and ammunition.

The reserve of many popular cartridges dried up seemingly overnight. Some, like .380ACP and .22LR, would take many years before they would consistently return to store shelves. My care-free attitude and hubris cost me: I had signed up for a pistol class, and the date was rapidly approaching.

I scoured my city, and surrounding counties, desperately trying to gather enough ammo to attend. I did, barely, by begging off my better prepared friends, and finally assembling a mish-mash of brands, bullet types and weights. They all had different POI’s, some were more reliable in my pistol, others less.

I completed the class, and didn’t wind up looking like a stooge. I learned a lot on the range, but my biggest lesson was one of preparedness: stock up on ammo, buy it cheap and stack it deep. I started to imagine a scenario where the outcome was not merely wasted money, or reduced training repetitions.

What if I needed that ammo for serious social purposes? What if I had a friend or relative that needed a bunch of ammo in a hurry? Would I be able to endure a crisis with my ammo on hand? Would I have enough to be the good friend one could count on? No, no I would not.

Storage: For a Rainy Day

If you are preparing for any occurrence of widespread societal unrest, collapse or regional disaster, you probably have a decent stash of ammo laid up all ready. Maybe, like me, you are also dedicated to keeping a goodly amount on hand to ensure you can attend scheduled or impromptu training opportunities. That’s good.

Considering you have a significant (or not so significant) quantity of ammo put away for future use, your next consideration must be making sure it is stored in optimal conditions. This is to prevent it from degrading, thus wasting your investment, and resulting in malfunctions or, worse, an empty gun in the future.

The length of time you plan to store the ammo, the local humidity at the storage site and the container you store the ammo in will all dictate how long you can expect your ammo to stay fresh. Effective long term storage is safe, and completely achievable by anyone with a small financial investment.

Typically, one will only need a quality metal or plastic ammo can that seals against air and moisture, some desiccant packs, and perhaps heavy, plastic zipper or vacuum-seal bags. Rain’s coming, read on for details!

Basics of Storage

Before you go squirreling ammo away in every Tupperware container you have plundered from your significant other or neighbors, it is instructive to understand what we are trying to protect our ammunition from. The single greatest harmful element to our ammunition is moisture, which leads to corrosion. The other is high temperature; ammo kept cool will last a very long time indeed. Keep both of these foremost in your mind when you are deciding where to locate your stash.

Moisture degrades ammo by causing corrosion, and seeping inside cartridge cases to degrade priming compound and render powder useless. If you have ever pulled a lone round out from the bottom of a forgotten range bag, or out of an old box in your basement, that green, musty stuff on the brass is a byproduct of corrosion. Cartridges so afflicted are not to be trusted. The same thing can happen to a big batch of ammo if we do not take steps to mitigate it.

Extreme heat, in excess of 150° F according to multiple manufacturers of commercial ammo, will start to degrade both primer and powder over time. This can lead to reduced performance or a complete failure to fire. Unless you are storing your ammo in an area where temperatures climb above 150°, such as the interior or trunk of a car during summer, this is not a concern in most locales.

Of the two, moisture is the factor we will pay the most attention to and work the hardest to thwart. If we can beat back moisture, ammo will keep viable for at least a decade, and often much longer. Lucky for you, even in humid climates, solutions are simple and only require a bit of diligence in rotating your stock. This will ensure your ammo is as ready and shiny as the day it rolled off the factory presses.

Gather Equipment

The only must-have pieces of storage equipment we require are suitable containers (typically a military or commercial sealing ammo can), some type of desiccant packs (or moisture absorption packs, typically made from silica), and good, sturdy sealable plastic bags. All are widely available and inexpensive, and in the case of silica packs, found free in all kinds of product packaging.

Start with your containers. I know a lot of people use heavy storage bags filled with loose cartridges and place those inside large plastic food containers, thinking that in conjunction they must surely be adequate. This is a bad play for a couple of reasons: 1.) containers of that type offer only a paltry seal against moisture and air, and 2.) those containers filled with ammo become very heavy, and quickly. I have seen more than few bust their bottoms when being hoisted. Not ideal.

If you don’t already have some, spring for either military surplus metal ammo cans, or nice, plastic commercial ones. Both feature high quality rubber gaskets to seal the contents against both air and moisture, and are easily recognized by their rectangular, boxy shape, hinged lids and collapsible handles. These are available in sizes approximating a lunchbox, enough for a few magazines or boxes, all the way up to very large metal trunks which can hold thousands of rounds.

When shopping for the military cans in particular, pay close attention to the gaskets around the rim, on either the lid or the can itself. Ensure there are no tears, dry rot, rust or major deformations that could compromise the integrity of the seal. For the commercial plastic containers, make sure they do in fact have a seal, and are of sturdy quality to resist breaking from rough handling, and the weight of their contents.

Have a look at the pics below for an example of a surplus military ammo can in great shape. Pay particular attention to the seal around the lid shown and the interior. That one will only need a little dressing on the seal before it is ready to go.

Buy enough, in the right sizes, to accomplish your storage objectives. This might mean a few small cans for loaded magazines or keeping in vehicles, and a larger chest to keep bulk ammo at home or office. This boils down to personal requirements, so give careful thought to your own situation and needs.

For your silica packs, you can use the small bags you get in nearly everything you buy from a store these days, or buy purpose-made ones at any hardware or big-box home improvement store. These silica packs won’t work indefinitely: periodically, maybe twice a year in a very humid environment, you will need to dry them out in an oven set on about 140-150° for about 30 minutes. Set the packs on a pan and pop them in the oven.

While you are at the store, grab a few of the flat, disposable moisture detection cards. A couple of these will let you check not only the moisture level at the location you plan on storing your ammo, but test your cans for moisture infiltration after you have them in place.

Get To Packing

But before you do, a few rules: If you are handling bulk ammo for long-term storage, wear latex or nitrile gloves. You may be thinking lead exposure, which is indeed a concern, but the greater issue for our task will be oils from your skin lingering on the cartridges.

Depending on your individual body chemistry, this oil can either cause corrosion eventually or immediately. No real way to know, but if you are the person that has to clean rust off his carry pistol weekly, you need to take extra precaution. Don’t let your efforts go to waste.

Place your moisture tester in the area where you want to locate your stash. Follow the instructions on the tester, and then get a reading after the specified time. Shoot for a moisture reading of 25% or less. Areas that are not well insulated or ventilated are bad choices, typically.

Think sheds, garages and basements. Car trunks can vary. Once you have picked a suitable site, place a small pallet or a platform on the ground if you aren’t using shelves. Try to avoid having the cans rest directly on the floor, especially in a garage or basement as condensation will be a risk.

For loaded magazines that you plan on storing for a comparatively shorter term, you can place them directly in a can, ready to go, with a desiccant pack and close the can.

Quick note on this- not all magazines are created equal! USGI aluminum M16/AR-15 magazines and some older pattern 1911 magazines may degrade when stored long-term fully loaded, specifically from the pressure of a fully compressed stack of rounds pushing against the frail, easily deformed feed lips. Magpul’s ubiquitous Pmags feature a top cover specifically designed to prevent such an occurrence, but I am uncertain if they are necessary considering the Pmag’s tougher feed lips. It certainly will not hurt to utilize them.

For bulk ammo, it is a good idea to remove it from any cardboard or paper packaging and place it into your plastic bags. Cardboard and paper both are bad about absorbing moisture. I have, however, stored ammo in the factory boxes, in cans, with silica for some years in a dry location and used it with no ill effects.

Whichever you decide, do not place your desiccant inside the bag with loose ammo: if, or when, it absorbs enough moisture, it will be trapped against the loose cartridges, which will start to corrode. The desired outcome is for the desiccant to intercept the moisture that gets past the seal of our can before it can harm the ammunition. Label your bags with manufacturer, caliber, type and date, squeeze out any air, and seal them.

Once all this is done, and your cans are full, close and latch the lid. Don’t forget to toss in a moisture tester in at least one. Set a reminder to come back and check the moisture tester according to the instructions it came with. If the level is too high inside the can, check your seals. If that does not work, replace the can. If that still does not work, choose another location.

Rotating Your Ammo

You can now be reasonably sure that your ammo supply will be safe from moisture, and assuming you aren’t storing them in a blazing hot location, will keep for a very long time. Note that even if you are keeping it in, say, your car or truck, most ammo will be fine over the short term if you remember to rotate it out.

So, say I have a stash of loaded pistol mags in a small BOB in my car, after 3 months of summer heat, I am going to pull them out, shoot them in practice or training, and then replenish them with ammo from my stores. The ammo in my stores will be replenished by new, store-bought ammo, and the cycle repeats itself.

I’ll do the same thing with my store at home: when it is time to train and I need a quantity of ammo to use, I will pull from my oldest stock first. When I replenish later, the next oldest batch will be “on deck” for consumption. This way I am always assured of having fresh ammo on hand. Ammo, stored well, will typically keep a very long time with no ill effects, but this is another small expenditure of effort to ensure you are keeping an optimal stock.

Other Considerations

You can buy surplus military ammo that will sometimes come in a handy sealed package, be it plastic or metal and ready to store as is. Russian surplus 7.62x39mm, 7.62x54mm and 5.45x39mm can all be had in the iconic metal “Spam” or “Sardine” can, which is welded shut, and completely impenetrable against any mechanical attempts at breaching it, save a grinder or the specialty can opener which they never come with in America. If you buy a quantity of such ammo and can test a small batch to ensure function in your firearm, you can store the rest unopened, confident that it will keep until you need it.

As far as quantity is concerned, that is highly dependent upon your individual wants and needs. My attitude about ammo-on-hand is this: For my primary calibers, I want at least twice as much of each as it would take for me to complete a 2 or 3 day class. Call it about 3,500 rounds each, minimum. That way I can use a large quantity of it for skill development, and have a hard reserve of at least a case in each caliber. Be sure also to take in to account the bulk and weight of ammo if you plan to flee a crisis. Ammo cans take up a lot of room and weight in vehicles, and space is at a premium. You need to know how much will fit where before it is time to hit the road.

Conclusion

You should ideally be buying ammo in bulk, for the cost savings as well as having a ready supply on hand. Don’t simply leave it sitting around in boxes or baggies for years on end. Keep your guns fed, and protect your investment of time and money by storing your ammunition properly and you will have taken one more step to ensure you prosper in the face of chaos, whatever form it takes.

How do you have your ammunition stored? How much is enough for your purposes? Have you experimented with alternative methods of keeping your ammo in good condition? Let me know in the comment section!

 

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here